skip to Main Content

Eco-friendly and biodegradable non ammoniated high performance floor stripper, remover and cleaner of old polish, floor dressing, and sealer which is acrylic polymer based.


Eco-Strip floor stripper is an eco-friendly non-ammoniated high performance stripper,  remover, and cleaner of  most  acrylic polymer floor dressing/ sealer and polishes on the market .

Features & Benefits:

Eco-Strip is a powerful environmentally friendly cleaning and acrylic polymer floor sealer/polish-stripping medium. Floor-Strip contains a selection of non-ionic and anionic surfactants and glycol ethers as well as proprietary preservatives to extend the product’s shelf life.

Eco-Strip is highly concentrated – See dilution which follows. It is highly active as a polymer floor sealer/polish stripper/remover (reaction takes place immediately in order to save time and cut down on labor costs).


Biodegradable and eco-friendly ammonia free Floor-Strip is applied:

* As a pretreatment stripper to prepare new floors for sealing with acrylic based polymer floor polishing products.

* As a cleaner/stripper on all surfaces where an acrylic polymer type floor sealer/polish was applied.

Use & Dilutions:

STRIPPING/RINSING: Dilute Floor-Strip up to 1: 5 w/w with water, depending on the coating thickness and type of polymer, spread over the surface, leave for a few minutes, scrub and rinse well with clean water.

Shelf Life & Storage:

Eco-Strip may be stored for up to one year in the original packaging, and under ambient conditions. Store between 10°C – 38°C.

For Best Results:

Use with our full range of bio-enzymatic products which benefit each other as you use them.  Save money and improve performance while reaping multiple benefits compared to traditional chemicals. Avoid using disinfectants and harsh chemicals, these kill our beneficial micro-organisms and harm the environment.

Physical Properties:

Physical State: Liquid

Appearance: Water white

% Solids Content: N/A

Specific Gravity: 1.01 kg/cm @ 200C Solubility: Soluble

PH Value: 12 – 13

Odour: Typical

Boiling Point: 1000C

Flash Point: Not available


Available in 5Kg, 25Kg & 1000 Kg flow bins

Back To Top